The Platecoil drum warmer is designed for use with steam, hot water, hot
oil, or high temperature heat transfer liquids. The Platecoil is
equally adaptable for cooling by using cold water or a refrigerant. The
cradle type drum warmer has a heating surface covering about half of the
horizontal 55 gallon steel drum. The warmer is slightly sloped for easy
draining. The end-rockers, handle and casters make the cradle heater
ideal for one-man loading and transporting. Fittings are conveniently
located on the bottom.
The drum cradle warmer has a heavy steel pipe frame, and three half
sections of heating/cooling channels, designed to contact the drum
between the reinforcing rings. The drum cradle is painted with one coat
red oxide primer.
This carbon steel drum cradle style has 5 inch wheels. The cradle unit
will heat a closed, properly ventilated 55 gallon steel drum of water
from 60° F to 160° F in approximately 2 1/2 hours using 150 psig steam.
The cradle unit is equipped with a 3/4 inch MPT (male pipe thread) inlet
and outlet.
- Ideal for use in hazardous areas
- Use with steam, water, hot oil, heat transfer liquids or refrigerant
- Maximum recommended operating pressure: 150 psig
-
55 gallon
With 5" diameter wheels
85 lbs.
Note: If using refrigerant, please notify your Customer Service Expert. Plain end pipes or socket weld fittings will
replace standard couplings at no extra charge.