EXPO™ Electric Drum Heaters, with thermostat control and three-heat
switch, are designed for use on 30 gallon all metal drums containing
materials with good heat receptivity.
This unit has a thermostat range of 200° – 400° F and standard 120V rating.
The thermostat control is numbered 1-7. The three-heat switch allows
for three wattage ranges per thermostat setting - the high setting is
for the maximum watts (1920), the medium setting is for half the wattage
(960) and the low setting is for 480 watts.
Electric drum heater installs easily with a spring-loaded toggle clamp,
for a snug fit around the steel drum. This heater has a NEMA 5-20P Plug.
This heater is for indoor use only.
Heater is equipped with neon pilot lights. The green pilot light will
glow as long as the heater is plugged in. The red pilot light will glow
until the heater reaches the set temperature and will go on and off as
the thermostat cycles.
- UL Listed
- CSA Certified
- One year warranty
-
16.0
30 gallon
5-20 P
Output 1920W @ 120V
200 - 400
120 VAC Single Phase
1920-960-480
12 lb
18 1/2"
5 3/8"
5 3/8"
This heater is for use with steel drums that do not contain a removable plastic liner.
Not for use with flammables or combustible materials or in a hazardous area.
Caution: Allowing liquid in a container to fall below
the level of the heater will render the heater ineffective and could
irreparably damage the baked on epoxy phenolic lining in lined steel
drums.