MORSE Forklift Karrier for steel drums slides quickly and easily onto
forks without tools - no modifications or connections to the lift truck
are required. Fork openings are 25 inches apart, accepts forks up to 2
1/2 inch x 6 1/2 inch. The Forklift Karrier has an 800 lb. capacity or
500 lb half drum capacity. A half full drum will be unbalanced and
bottom heavy so when you tilt it, the load shifts differently than if it
were a full drum.
You control drum tilt with 30:1 ratio gear and sprocket drive. The 20
foot pull chain has 10 feet drop of chain that allows the operator to
turn the drum from the driver seat of the fork truck.
This Forklift Karrier features the MORcinch drum handling system that
automatically adjust for 22 inch to 23 1/2 inch diameter drums with
sliding idler and durable stress relief weld joints. It has a flexible
cinch chain cover to enhance grip and help protect sidewall of your
drum.
Lift, move and control pouring of a heavy drum right from the seat of your forklift.
- All operation controlled from drivers seat
- 800 lb capacity
- 500 lb half drum capacity
- 30:1 gear ratio
Options Available include: Drum diameter adapters for handling smaller drums. Bracket (Product code 4556-P) or Rim Clamp (Product code 4560-P) for handling plastic and fiber drums and MorStop tilt brake that automatically stops and holds the tilt angle of the drum.
Note: Not every style and size option will work on
every MORSE unit. A Hand Crank (Product code X02-285) or Hand Wheel (Product code X03-285) is
available to replace the manual tilt mechanism standard on this unit.
Spark Resistant Models are available through special order.
800 lb
500 lb
55 gal. steel
30:1
Manual
149 lb
42"
34"
23"