Morse Drum Rackers


[<< BACK ]  


MORSE Omni-Lift Drum Racker - Electric Lift/Manual Tilt

MORSE Omni-Lift Drum Racker - Electric Lift/Manual Tilt


Product Code: 405-120

Price: $3,535.10 Per Each


Qty  Each
Total actual cost of shipping this order to your location will be applied to your credit card

The MORSE Omni-Lift Drum Racker is a versatile drum handler that lets one person pick up drums, regardless of position, and raise them up to 72 inches. It is designed for use with pallet racks that have adjustable drum cradles. It handles fully loaded drums up to 800 lb or half-full drums up to 500 lb. A half full drum will be unbalanced and bottom heavy so when you tilt it, the load shifts differently than if it were a full drum.

This model has Power Lift and Manual Tilt.  The manual tilt is with a hand crank. The power-lift option eliminates the manual effort to lift the drum. This model has a 115 VAC, 1HP, single-phase TEFC electric motor, supplied with a 3-wire cord, plug and switch.

All welded steel frame rolls easily on two 8 inch polyolefin wheels and two 4 inch swivel casters. The minimum clearances required are 7 inch between drums and 12 inch between drum and rack upright on right side.  The drum cradles on the rack must be no wider than 16 inch for steel drums or no wider than 11 inch for plastic drums.

Electric
Manual
450 lb
72"
50"
55"

An adapter (Product code AP405) is available for 55 gallon plastic drums, which provides pads to support the flexible sidewalls.

Manual tilt models accept MORStop Tilt-Brake option.

Spark resistant models are available through special order. Call our Customer Service Experts at 918-427-3600 for details.