Morse Drum Lifter


[<< BACK ]  


MORSE Hydra-Lift Karrier - Manual Tilt - Hydraulic Lift

MORSE Hydra-Lift Karrier - Manual Tilt - Hydraulic Lift


Product Code: 400A96

Price: $2,190.00


Qty 
Total actual cost of shipping this order to your location will be applied to your credit card

This MORSE Hydra-Lift Karrier has Hydraulic Lift and Manual Tilt. It allows one person to easily handle a fully loaded drum, up to 800 lb or half-full drums up to 500 lb. A half full drum will be unbalanced and bottom heavy so when you tilt it, the load shifts differently than if it were a full drum.

The MORCinch feature is designed to automatically adjust for 22 inch to 23 1/2 inch diameter steel or plastic drums. The manual tilt is pull chain-wheel driven. It allows the drum to be rotated 360° either direction, holding the drum at any angle desired.

All welded steel frame rolls easily on two 8 inch polyolefin wheels and two 4 inch swivel casters, which are hidden under the base. It can be screwed into the plant floor if necessary. The hand-operated hydraulic pump gives full lift in about 45 strokes, which lifts the drum up to 96 inch.

Options Available include: Drum diameter adapters for handling smaller drums, Bracket (Product code 4556-P) or Rim Clamp (Product code 4560-P) for handling plastic drums, and the MORStop Tilt-Brake which automatically stops and holds the tilt angle of the drum. 

  • Load, move, lift, tilt and drain full drums
  • Safe, one-person operation
  • 69"
    72 1/2"
    49"
    96"
    Chain Wheel
    311 lb

Spark resistant and stainless steel models and various options are available through special order. Call our Customer Service Experts at 918-427-3600 for details.