The heavy duty stainless steel MORSE Kontrol Karrier attaches to a hoist and pours from drums at any desired height. It handles drums up to 1500 lb or 800 lb half drum capacity. A half full drum will be unbalanced and bottom heavy so when you tilt it, the load shifts differently than if it were a full drum. This Kontrol Karrier provides finer tilt control with the 60:1 ratio gear and sprocket drive.

The heavy duty Kontrol Karrier™ features the MORcinch drum handling system that automatically adjust for 22 inch to 23 1/2 inch diameter drums with sliding idler and durable stress relief weld joints. It has a flexible cinch chain cover to enhance grip and help protect sidewall of your drum.

This chain operated gear drive rotates drum forward or backwards to any angle using a 12 foot pull chain. Six feet of chain wraps around the gear drive leaving a 6 foot drop of chain for pulling, manually rotating the drum to the desired angle for high level pouring.

Makes draining drums at any height easier and safer!

• Fits 55 gallon steel drums
• 360º rotation for controlled overhead pouring
• Includes 60:1 gear motor
• Cap. Full Drum:1500 lb

  Cap. Half Drum:800 lb

  Fits Drum:55 gal. steel

  Gear Ratio:60:1

  Wt.:109 lb

  Length:39"

  Width:39"

  Height :10"

Options Available for this unit include: Drum diameter adapters for handling smaller drums. Bracket (Product code 4556-P) or Rim Clamp (Product code 4560-P) for handling plastic and fiber drums and MORStop Tilt Brake that automatically stops and holds the tilt angle of the drum.

Note: Not every style and size option will work with every MORSE unit. A Hand Crank (Product code X02-185HD) or Hand Wheel (Product code X03-185HDSS) is available to replace the manual tilt mechanism standard on this unit. 

Spark Resistant Models are available through special order.