This MORSE Hydra-Lift Karrier has Hydraulic Lift and Manual
Tilt. It allows one person to easily handle a fully loaded drum, up to
800 lb or half-full drums up to 500 lb. A half full drum will be
unbalanced and bottom heavy so when you tilt it, the load shifts
differently than if it were a full drum.
The MORCinch feature is designed to automatically adjust for 22 inch to
23 1/2 inch diameter steel or plastic drums. The manual tilt is pull
chain-wheel driven. It allows the drum to be rotated 360° either
direction, holding the drum at any angle desired.
All welded steel frame rolls easily on two 8 inch polyolefin wheels and
two 4 inch swivel casters, which are hidden under the base. It can be
screwed into the plant floor if necessary. The hand-operated hydraulic
pump gives full lift in about 45 strokes, which lifts the drum up to 72
inch.
Options Available include: Drum diameter adapters for
handling smaller drums, Bracket (Product code 4556-P) or Rim Clamp (Product code 4560-P)
for handling plastic drums, and the MORStop Tilt-Brake which
automatically stops and holds the tilt angle of the drum.
- Load, move, lift, tilt and drain full drums
- Safe, one-person operation
-
55"
60"
44"
72"
Chain Wheel
307 lb
Spark-resistant and Stainless Steel models, and various options are
available through special order. Call our Customer Service Experts at 918-427-3600 for details.