Packmaster Compactors (Trash)

Packmaster Compactors (Trash)
  • Reduces waste disposal costs, increases recycling revenue
  • Your drums can contain up to seven times more material
  • Choice of manual or air-operated models
Structural steel units develop up to 7000 lbs. of compacting power. Crush paper, filters, aluminum cans, absorbents, disposable clothing. 1/4" thick ram plate. 18 month limited warranty. Manual Packmaster is simple and safe to use. Slide an open-head drum (up to 39" high) onto the base and pump the ram lever like an automobile jack. Air Packmaster offers higher speed operation. Connects to any compressed air source (70-250 psi). Safety-designed control arm keeps operators hands and face away from compactor, stops cycle if arm is lowered or dropped. Completely cycles in 1 minute. Requires 8 CFM @ 100 psi to develop 2600 lbs. of compaction force. Develops 7000 lbs. of compaction force at 250 psi. Spark Resistant Packmaster has high density polyethylene covered ram plate and drum skid area, low density polyethylene covered frame uprights and nylon pivot point bushing.  

[<< BACK ]  

Mouseover to zoom or click to enlarge

Oberg Drum Crusher and Compactor Electric


Product Code: D60

Price: Based on Selection


Qty  Each
Total actual cost of shipping this order to your location will be applied to your credit card

CALL FOR QUOTE. ALSO AVAILABLE IN EXPLOSION PROOF (918)427-3600

Save on waste hauling costs while saving space by crushing empty drums instead of storing them until they are hauled away. Reduce waste volume that cuts down on trash pick ups, eliminate hazardous waste disposal fees and increase income by selling recyclable materials.

The Oberg D60 Drum Crusher reduces a 55 gallon steel drum down to a 4 inch high pancake and it can run 24/7 without any type of rest period.

Includes a quick change pressure plate for easy conversion to in drum compacting.

  • 60,000 lb crushing force, 60 second cycle time
  • Automatic system with one-button operation
  • Use as a drum crusher or trash compactor
  • Durable 3/8 inch steel structural components

Features a unique reverse orientation dual cylinder (4 inch diameter with 48 inch stroke) design virtually eliminates the possibility of bent rods. 79 inch Height (cylinder retracted), 117 inch (cylinder extended) x 42 inch Wide x 54 inch Diameter.

An over sized chamber of 48 inch H x 30 inch W x 30 inch D allows for crushing drums up to 85 gallons in size.

Drum for use when compacting waste inside drum must be purchased separately.

Motor: 10 HP, 3 Phase. Select low voltage 208-220-240V or high voltage 408-440-480V when ordering.