Packmaster Compactors (Trash)

Packmaster Compactors (Trash)
  • Reduces waste disposal costs, increases recycling revenue
  • Your drums can contain up to seven times more material
  • Choice of manual or air-operated models
Structural steel units develop up to 7000 lbs. of compacting power. Crush paper, filters, aluminum cans, absorbents, disposable clothing. 1/4" thick ram plate. 18 month limited warranty. Manual Packmaster is simple and safe to use. Slide an open-head drum (up to 39" high) onto the base and pump the ram lever like an automobile jack. Air Packmaster offers higher speed operation. Connects to any compressed air source (70-250 psi). Safety-designed control arm keeps operators hands and face away from compactor, stops cycle if arm is lowered or dropped. Completely cycles in 1 minute. Requires 8 CFM @ 100 psi to develop 2600 lbs. of compaction force. Develops 7000 lbs. of compaction force at 250 psi. Spark Resistant Packmaster has high density polyethylene covered ram plate and drum skid area, low density polyethylene covered frame uprights and nylon pivot point bushing.  

[<< BACK ]  

Mouseover to zoom or click to enlarge

Newstripe Pack Master™ Trash Compactor Air Operated And Spark Resistant


Product Code: DC1259A-M

Price: $5,355.95 Per Each


Qty  Each
Total actual cost of shipping this order to your location will be applied to your credit card

Spark Resistant trash compactor has all the great features of the Pack Master Air except the contact surfaces are covered in 1/8 inch aluminum. Compactor completely cycles in 30 seconds @ 100 psi. Easy to use trash compactor just place drum of material on the base, lift safety lever, compact or retract with joystick control.

Drop safety lever to secure pressure plate after retraction. Two handed safety lever operation keeps operator's hands and face away from compactor, fail safe in place if arm drops or is lowered. When air is disconnected, pressure plate cannot fall.

Compact paper, filters, aluminum cans, absorbents, disposable clothing. Unit is not explosion proof. Connects to any compressed air source (70 - 250 psi).

  • Compacts material in standard 55 gallon steel drum (drum sold separately)
  • 4:1 compaction ratio, up to 3,900 lb of force
  • All welded structural steel and industrial grade components
  • All contact surfaces covered in 1/8" aluminum

Caution: Unit is not designed for crushing of glass containers or items that may shatter or contain volatile vapors.

Specifications

Dimensions:  76" H x 36" W x 27" D

Required Operating Clearance: 80" H x 38" W x 48" D

Ship Weight: 260 lb 

Crate Dimension: 86" H x 45" x 48"

Drum Clearance: 38" H x 25.25" W

Air Cylinder: Commercial grade, 6" diameter x 24" stroke length with oversized 1.75" piston rod

Air Requirements: Maximum 150 psi Standard shop air (8 cfm @ 100 psi)

Compaction Force: 2600 lb of force @ 100 psi 3900 lb of force @ 150 psi

Construction: All welded structural steel and industrial grade components. Contact surfaced covered in 1/8" aluminum 

Warranty: 18 month limited warranty against defects in materials and workmanship

Pressure Plate: 55 gallon: 20" diameter (standard)