The MORSE Omni-Lift Drum Racker is a versatile drum handler that lets
one person pick up drums, regardless of position, and raise them up to
72". It is designed for use with pallet racks that have adjustable drum
cradles. It handles fully loaded drums up to 800 lb or half-full drums
up to 500 lb. A half full drum will be unbalanced and bottom heavy so
when you tilt it, the load shifts differently than if it were a full
drum.
This model has Power Lift and Power Tilt. This model’s motor is
operated by a 12 VDC battery. Separate 100/220V 50/60Hz AC charger is
included. It is equipped with separate control valves for lifting and
rotating.
All welded steel frame rolls easily on two 8 inch polyolefin wheels and
two 4 inch swivel casters. The minimum clearances required are 7 inch
between drums and 12 inch between drum and rack upright on right side.
The drum cradles on the rack must be no wider than 16 inch for steel
drums or no wider than 11 inch for plastic drums.
An adapter (Product code AP405) is available for 55 gallon plastic drums, which provides pads to support the flexible sidewalls.
Manual tilt models accept MORStop Tilt-Brake option.
Spark resistant models are available through special order. Call our Customer Service Experts at 918-427-3600 for details.