The heavy duty MORSE Kontrol Karrier attaches to a hoist and pours from
drums at any desired height. It handles drums up to 1500 lb or an 800
lb half drum capacity. A half full drum will be unbalanced and bottom
heavy so when you tilt it, the load shifts differently than if it were a
full drum. This Kontrol Karrier provides finer tilt control with the
60:1 ratio gear and sprocket drive.
The heavy duty Kontrol Karrier features the MORcinch drum handling
system that automatically adjust for 22 inch to 23 1/2 inch diameter
drums with sliding idler and durable stress relief weld joints. It has a
flexible cinch chain cover to enhance grip and help protect sidewall of
your drum.
This chain operated gear drive rotates drum forward or backwards to any
angle using a 12 foot pull chain. Six feet of chain wraps around the
gear drive leaving a 6 foot drop of chain for pulling, manually rotating
the drum to the desired angle for high level pouring.
Makes draining drums at any height easier and safer!
- Fits 55 gallon steel drums
- 360º rotation for controlled overhead pouring
- Includes 60:1 gear motor
-
1500 lb
800 lb
55 gal. steel
60:1
109 lb
39"
39"
10"
Options Available for this unit include: Drum diameter adapters for handling smaller drums. Bracket (Product code 4556-P) or Rim Clamp (Product code
4560-P) for handling plastic and fiber drums and MORStop Tilt Brake
that automatically stops and holds the tilt angle of the drum.
Note: Not every style and size option will work with
every MORSE unit. A Hand Crank (Product code X02-185HD) or Hand Wheel (Product code
X03-185HD) is available to replace the manual tilt mechanism considered
standard on some units.
Spark Resistant Models are available through special order.
Call our Customer Service Experts at 918-427-3600 for assistance with selecting options.