IBC Containment

IBC Containment

What You Need to Capture IBC Spills and Leaks

IBC spills can be extremely serious. You need to prevent them from happening. That why the U.S. Environmental Protection Agency's Resource Conservation and Recovery Act (RCRA) requires containment systems to prevent spills or leaks that could escape into the environment or endanger personnel.

Take the Proper Precautions

Sure, your drums and pails are solid and tight, and you're not expecting a problem. But accidents happen. Nobody wants spills or leaks to escape into the environment or endanger personnel.

What is Secondary Containment?

It is the means of capturing a spill, leak or drip from a package. Whether it's a pallet, tray, basin, or deck, all containment systems must have three basic design features to comply with EPA 40 CFR 264.175:

  • According to the EPA, they must be "leak-proof and sufficiently impervious to the liquid container to contain leaks, spills, and accumulated precipitation until the collected material is detected and removed."

  • They must be "designed and operated to drain and remove liquids from the leak, spill, or precipitation, unless the containers are elevated or are otherwise protected from the accumulated liquid."

  • They must "have the capacity to contain 10% of the total volume of all containers stored, or 100% of the volume of the largest single container, whichever is greater."


[<< BACK ]  


Low Cost IBC Spill Protection System

Low Cost IBC Spill Protection System


Product Code: CT400

1 2-5 6 +
$1,150.65   $1,101.85   $1,040.45  


Qty 
Total actual cost of shipping this order to your location will be applied to your credit card

Here's the way to go for economical IBC secondary containment. The steel frame sits in the poly sump to make a complete system for dispensing with spill containment. This systems open design allows you to dispense right into a bucket, and makes it easy to spot leaks or spills to clean up.

The sturdy steel frame is 48 inch x 48 inch with a 24 1/2 inch height. It has adjustable pivoting footpads so the unit stays level even on uneven surfaces. 

The UV resistant polyethylene sump with 385 gallon capacity is great for outdoor storage.

This spill protection system helps you comply with 40 CFR 264.175.

It's two-way forklift entry is convenient to transport when the IBC is removed.

  • Zinc plated tubular steel frame
  • UV-resistant polyethylene sump
  • Holds up to 8000 lb UDL
  • Stack IBC Tanks two high
  • IBC System
    165 lbs.
    48"
    48"
    24 1/2"
    Sump 76" x 76" x 20"

Note: This is a spill containment system only, IBC is not included.