Heavy Duty (PTFE) Teflon Liners

  • Resistant to most chemicals
  • Can be short-term hot-filled up to 550° F
The heavy duty 55 gallon conductive liner is polytetrafluoroethylene (PTFE), also known as Teflon. Conductive liners are rated for temperatures as high as 550º F, will not contaminate media. These sturdy liners offer a leak tight design. This conductive liner is for anti-static applications, non food grade.

[<< BACK ]  


55 Gallon Conductive Liner - Straight Bottom - 4 mil

55 Gallon Conductive Liner - Straight Bottom - 4 mil


Product Code: CL55

1-99 100 +
$9.10   $7.60  


Qty 
Total actual cost of shipping this order to your location will be applied to your credit card

Conductive drum liners are recommended for use with flammable materials, including coatings, paints, adhesives, solvents or other materials where static electricity build-up is a problem. They can be used for shipping or storing nearly any wet or dry product, any viscosity liquid, or any powder, particulate, or paste. The LDPE film resists weak acids, methanol, ethanol and isopropanol, and significantly slows the attack of weak alkalis and ketones. Extra length permits you to simply gather the bag at the top, then twist and tie off to protect contents. 

Note: Conductive liners are intended as an aid to dissipate static build-up when liner and drum are electrically grounded. They are not designed as, and should not be used as, the primary controller of static electricity in a process. Manufacturer recommends that the customer verify that these liners are fit for use by consulting a safety engineer or safety consultant.

100
71 lb
12.5 oz.
23 3/4"
60"

Liner

LDPE

Liners have a surface resistivity range of 103 - 105 Ω/square and volume resistivity <3000 Ω-cm. Withstands fill temperatures - 20º F to 175º F.

Minimum quantity for "55 Gallon Conductive Liner - Straight Bottom - 4 mil" is 100.