Conductive drum liners are recommended for use with flammable materials,
including coatings, paints, adhesives, solvents or other materials
where static electricity build-up is a problem. They can be used for
shipping or storing nearly any wet or dry product, any viscosity liquid,
or any powder, particulate, or paste. The LDPE film resists weak acids,
methanol, ethanol and isopropanol, and significantly slows the attack
of weak alkalis and ketones. Extra length permits you to simply gather
the bag at the top, then twist and tie off to protect contents.
Note: Conductive liners are intended as an aid to
dissipate static build-up when liner and drum are electrically grounded.
They are not designed as, and should not be used as, the primary
controller of static electricity in a process. Manufacturer recommends
that the customer verify that these liners are fit for use by consulting
a safety engineer or safety consultant.
100
71 lb
12.5 oz.
23 3/4"
60"
LDPE
Liners have a surface resistivity range of 103 - 105 Ω/square and volume resistivity <3000 Ω-cm. Withstands fill temperatures - 20º F to 175º F.
Minimum quantity for "55 Gallon Conductive Liner - Straight Bottom - 4 mil" is 100.