The Platecoil drum warmer is designed for use with steam, hot water, hot
oil, or high temperature heat transfer liquids. The Platecoil is
equally adaptable for cooling by using cold water or a refrigerant. The
cradle type drum warmer has a heating surface covering about half of the
horizontal 55 gallon steel drum. The warmer is slightly sloped for easy
draining. The end-rockers and handle make the cradle heater ideal for
one-man loading and transporting. Fittings are conveniently located on
the bottom.
The drum cradle warmer has a heavy steel pipe frame, and three half
sections of heating/cooling channels, designed to contact the drum
between the reinforcing rings.
The cradle unit will heat a closed, properly ventilated 55 gallon steel
drum of water from 60° F to 160° F in approximately 2 1/2 hours using
150 psig steam. The cradle unit is equipped with a 3/4 inch MPT (male
pipe thread) inlet and outlet.
Ideal for use in hazardous areas
Use with steam, water, hot oil, heat transfer liquids or refrigerant
Maximum recommended operating pressure: 150 psig
Container Size: 55 gallon
Description: No wheels, carbon steel
Wt.: 80 lbs.
If using refrigerant, please notify your Customer Service Expert.
Plain end pipes or socket weld fittings will replace standard couplings
at no extra charge.