Immersion / Specialty Heaters

Immersion / Specialty Heaters

Immersion Heaters offer Fast Heating and High Efficiency

Immersion Heaters have a heating element at their base and make direct contact with the contained liquid, which makes them an excellent choice for faster heating and higher efficiency. But, before you use an immersion or specialty heater you have to check the type of container and what temperature the contents can tolerate.

[<< BACK ]  


EXPO Heater Dolly - 240V

EXPO Heater Dolly - 240V


Product Code: HDD55-240

Price: $604.95


Qty 
Total actual cost of shipping this order to your location will be applied to your credit card

This unique and versatile heater dolly is designed to warm non-flammable, non-combustible, non-hazardous heat sensitive materials in a 55 gallon steel drum. This dolly uses infinite control heat which cycles the current on and off to create a pulsing action.

The dolly‚Äôs 1,920 watt heating element is encased in a 15 1/4 inch square, 1/4 inch thick aluminum pressure plate.  The dolly has a 900 lb capacity and rolls on four 3 inch diameter phenolic swivel casters. Supplied with a 6 foot power cord and high amperage (NEMA 6-15P) three pin plug.

These heaters do not have a thermostat and will not automatically reach and hold a given temperature. This heater is for indoor use only. It is considered a low temperature heater and cannot be used with plastic, plastic lined or fiber drums.

  • Power: 240V
  • Watts: 1920
  • UL and cSA Listed
  • 900 lb
    3" phenolic swivel
    6-15P
    240V, 1920W
    70 lb
    28 1/2"
    6"
    24"