Immersion / Specialty Heaters

Immersion / Specialty Heaters

Immersion Heaters offer Fast Heating and High Efficiency

Immersion Heaters have a heating element at their base and make direct contact with the contained liquid, which makes them an excellent choice for faster heating and higher efficiency. But, before you use an immersion or specialty heater you have to check the type of container and what temperature the contents can tolerate.

[<< BACK ]  


EXPO Heater Dolly - 120V

EXPO Heater Dolly - 120V


Product Code: HDD55

Price: $602.95


Qty 
Total actual cost of shipping this order to your location will be applied to your credit card

This unique and versatile heater dolly for 55 gallon steel drums is designed for non-flammable, non-combustible, non-hazardous heat sensitive materials. The heater dolly uses infinite control heat which cycles the current on and off to create a pulsing action.

The dolly‚Äôs 1,750 watt heating element is contained in a 15 1/4 inch square, 1/4 inch thick aluminum pressure plate. 

This 900 lb capacity dolly rolls on four 3 inch diameter phenolic swivel casters. Supplied with a six foot  power cord and a high amperage (NEMA 5-20P) three pin plug.

These heaters do not have a thermostat and will not automatically reach and hold a given temperature. This heater is for indoor use only. It is considered a low temperature heater and cannot be used with plastic, plastic lined or fiber drums.

  • Power: 120V
  • Watts: 1750
  • UL and cSA listed
  • 900 lb
    3" phenolic swivel
    5-20P
    120V, 1750W
    70 lb
    28 1/2"
    6"
    24"