Immersion / Specialty Heaters

Immersion / Specialty Heaters

Immersion Heaters offer Fast Heating and High Efficiency

Immersion Heaters have a heating element at their base and make direct contact with the contained liquid, which makes them an excellent choice for faster heating and higher efficiency. But, before you use an immersion or specialty heater you have to check the type of container and what temperature the contents can tolerate.

[<< BACK ]  


Faratherm Base Heater for Hazardous Areas

Faratherm Base Heater for Hazardous Areas


Product Code: FARATHERM

Price: $3,990.00


Qty 
Total actual cost of shipping this order to your location will be applied to your credit card

The Faratherm™ Induction Base Heater is designed for use with 55-gallon plastic, fiber or steel drums. The drum sits directly on the base heater and can reach a max. temp. of 250° F.  It can be used in conjunction with the Thermosafe® induction steel drum heater (SKU THERM55) to reduce the heat time required to reach melt point.

Faratherm™ is approved for use in Hazardous Zones 1 and 2 (IECEx / ATEX standards)

The Faratherm™ may be used independently with any size steel, plastic, fiber, stainless steel, or cardboard container up to 24 inch diameter.

Heater runs on single phase 240V, 50/60Hz AC power (direct wire). Lower temperatures are necessary for heating plastic or cardboard; the Faratherm™ must be wired for 120V which produces a max. temp. of 127° F.

Faratherm induction base heater
99 lb
35"
29 5/16"
2 5/16"

Note: The Faratherm makes contact with the container placed on it and its top steel heating plate gets hot.