Morse Drum Lifter


[<< BACK ]  


MORSE Hydra-Lift Karrier -  Manual Tilt - Battery Lift

MORSE Hydra-Lift Karrier - Manual Tilt - Battery Lift


Product Code: 400A96-125

Price: $3,100.00


Qty 
Total actual cost of shipping this order to your location will be applied to your credit card

MORSE Hydra-Lift Karrier has Manual Tilt and Power Lift. The power lift option eliminates the manual effort to lift the drum. The tilt control is pull chain-wheel driven.  It allows the drum to be rotated 360° either direction, holding the drum at any angle desired. This model’s motor is operated by a 12 VDC battery. Separate charger is included.

All welded steel frame rolls easily on two 8 two polyolefin wheels and two 4 two swivel casters, which are hidden under the base. It can be screwed into the plant floor if necessary. The drum can be lifted up to 96 inches. The MORCinch feature is designed to automatically adjust for 22 inch to 23 1/2 inch diameter steel or plastic drums.

Options Available include: Drum diameter adapters for handling smaller drums, Bracket (Product code 4556-P) or Rim Clamp (Product code 4560-P) for handling plastic drums and the MORStop Tilt-Brake which automatically stops and holds the tilt angle of the drum.

Spark-resistant and Stainless Steel models are available through special order.  Call our Customer Service Experts at 918-427-3600 for details.

  • Drum handler lifts and/or tilts drums
  • Eliminates manual effort
  • 800 lb. capacity/500 lb half drum capacity
  • :69"
  • 72 1/2"
  • 49"
  • 96"
  • Battery
  • Chain Wheel
  • 436 lb
 

A half full drum will be unbalanced and bottom heavy so when you tilt it, the load shifts differently than if it were a full drum.