This MORSE Hydra-Lift Karrier has manual tilt and power
lift with an ergonomic air powered motor. The vane-type air motor simply
attaches to your plant airline and you are ready to raise or lower a 55
gallon steel drum. The drum can be lifted up to 72 inches. The air
power-lift option eliminates the manual effort to raise or lower the
drum. This Hydra-Lift Karrier includes the MORCinch drum handling
system designed to automatically adjust for 22 inch to 23-1/2 inch
diameter steel or plastic drums.
The manual tilt control is a chain wheel with a pull chain. It allows
the drum to be rotated 360° either direction, holding the drum at any
angle desired.
All welded steel frame rolls easily on two 8 inch poly olefin wheels and
two 4 inch swivel casters, which are hidden under the base. It can be
screwed into the plant floor if necessary.
- Drum handler lifts and/or tilts drums
- 800 lb. capacity/500 lb half drum capacity
-
55"
-
60"
-
44"
-
72"
-
Air
-
Chain Wheel
-
338 lb
A half full drum will be unbalanced and bottom heavy so when you tilt
it, the load shifts differently than if it were a full drum.
Options Available include: Drum diameter adapters for handling smaller drums, Bracket (Product code 4556-P) or Rim Clamp (Product code
4560-P) for handling plastic drums and the MORStop Tilt-Brake which
automatically stops and holds the tilt angle of the drum.
Optional filter, regulator, and lubricators are available.
Spark-resistant and Stainless Steel models are available through special
order. Call our Customer Service Experts at 918-427-3600 for details.