Morse Drum Lifter


[<< BACK ]  


MORSE Hydra-Lift Karrier - Manual Tilt - Electric Lift

MORSE Hydra-Lift Karrier - Manual Tilt - Electric Lift


Product Code: 400A72-120

Price: $2,850.00


Qty 
Total actual cost of shipping this order to your location will be applied to your credit card

This MORSE Hydra-Lift Karrier has Manual Tilt and Power Lift.  The power-lift option eliminates the manual effort to lift the drum. This model has a 115 VAC, 1HP, single-phase TEFC electric motor, supplied with a 3-wire cord, plug and switch.  The manual tilt is pull chain-wheel driven. It allows the drum to be rotated 360° either direction, holding the drum at any angle desired.

All welded steel frame rolls easily on two 8 inch poly olefin wheels and two 4 inch swivel casters, which are hidden under the base. It can be screwed into the plant floor if necessary. The drum can be lifted up to 72 inches.  The MORCinch feature is designed to automatically adjust for 22 inch to 23-1/2 inch diameter steel or plastic drums.

Options Available include: Drum diameter adapters for handling smaller drums, Bracket (Product code 4556-P) or Rim Clamp (Product code 4560-P) for handling plastic drums and the MORStop Tilt-Brake which automatically stops and holds the tilt angle of the drum. Spark-resistant and Stainless Steel models are available through special order.  Call our Customer Service Experts at 918-427-3600 for details.

  • Drum handler lifts and/or tilts drums
  • Eliminates manual effort
  • 800 lb. capacity/500 lb half drum capacity
  • 55"
    60"
    44"
    72"
    Electric
    Chain Wheel
    348 lb

A half full drum will be unbalanced and bottom heavy so when you tilt it, the load shifts differently than if it were a full drum.