Morse Drum Lifter


[<< BACK ]  


MORSE Hydra-Lift Karrier - Manual Tilt - Electric Lift

MORSE Hydra-Lift Karrier - Manual Tilt - Electric Lift


Product Code: 400A60-120

Price: $2,775.00


Qty 
Total actual cost of shipping this order to your location will be applied to your credit card

This MORSE Hydra-Lift Karrier has manual tilt and electric power lift. The electric power lift has a 115 VAC, 1HP, single-phase TEFC electric motor, supplied with a 3-wire cord, plug and switch. The drum can be lifted up to 60 inches. The power-lift option eliminates the manual effort to lower or raise the drum.

The manual hand crank tilt control allows the drum to be rotated 360° either direction, holding the drum at any angle desired. The MORCinch feature is designed to automatically adjust for 22 inch to 23 1/2 inch diameter steel or plastic drums.

All welded steel frame rolls easily on two 8 inch polyolefin wheels and two 4 inch swivel casters, which are hidden under the base. It can be screwed into the plant floor if necessary. 

  • Drum handler lifts and/or tilts drums
  • 800 lb. capacity/500 lb half drum capacity
  • 55"
  • 60"
  • 44"
  • 72"
  • Electric
  • Hand Crank
  • 348 lb
 

A half full drum will be unbalanced and bottom heavy so when you tilt it, the load shifts differently than if it were a full drum.

Options Available include: Drum diameter adapters for handling smaller drums, Bracket (Product code 4556-P) or Rim Clamp (Product code 4560-P) for handling plastic drums, and the MORStop Tilt-Brake which automatically stops and holds the tilt angle of the drum.

Spark-resistant and Stainless Steel models are available through special order. Call our Customer Service Experts at 918-427-3600 for details.