MORSE Forklift Karrier Lifts and Dumps

MORSE Forklift Karrier Lifts and Dumps
  • Transport, lift, rotate 360°, drain drums up to 2000 lbs.
  • Convenient operation from the operator’s seat

Converts your forklift into an all-purpose drum handler. Mounts quickly and easily on forks without tools. No modifications or connections to truck are needed. High strength saddle, alloy cinching chain and tightener with patented dual safety lock.10’ pull-chain allows control from the operator’s seat, rotates drum to any desired angle. 30:1 units have a gear drive, 60:1 units are equipped with a heavy-duty gear drive, 150:1 unit incorporates a 2-stage worm gearbox. Fork openings are 24-1/2" apart, accept forks up to 2-1/2" x 6-1/2". Battery Powered Karrier ™ allows precise power dumping up to 180°, forward or reverse. Completely self-contained unit has 12 volt DC hydraulic power pack and two-button control pendant with cord. Supplied with 12 volt deep-cycle battery and 110 volt AC charger.

*Spark-resistant model. Has Monel saddle and stainless steel cinching chain to reduce risk of sparks.


[<< BACK ]  


MORSE Forklift Karrier - 1500 lb. Capacity - Battery Powered Tilt

MORSE Forklift Karrier - 1500 lb. Capacity - Battery Powered Tilt


Product Code: 285A-BP

Price: $2,750.95 Per Each


Qty  Each
Total actual cost of shipping this order to your location will be applied to your credit card

MORSE battery powered tilt allows precise power dumping. Completely self-contained unit has 12 volt DC hydraulic power pack and uses a two-button pendant. Supplied with 12 volt deep - cycle battery and 110 volt AC charger. No power connection or modifications to the lift truck are required.

This Forklift Karrier with battery powered tilt has a 1500 lb. capacity or an 800 lb half drum capacity. A half full drum will be unbalanced and bottom heavy so when you tilt it, the load shifts differently than if it were a full drum. Fork openings are 25 inches apart, accepts forks up to 2 1/2 inch x 6 1/2 inch.

Options Available include: Drum diameter adapters for handling smaller drums are available. Accepts Bracket (Product code 4556-P) or Rim Clamp (Product code 4560-P) for handling plastic or fiber drums, and the MorStop tilt brake that automatically stops and holds the tilt angle of the drum.

1500 lb
800 lb
55 gal. steel
Hydraulic tilt
Battery
355 lb
39"
41"
28"

Note: Not every style and size option will work on every MORSE unit. 

Spark Resistant Models are available through special order.

Call our Customer Service Experts at 918-427-3600 for assistance with selecting options.

Shown 285AGR