Emergency Preparedness Products
Electronic Components and Related Products
Emergency Medical Supplies



Payment Options

For your convenience, we accept the following:

as well as checks and money orders.

Kontrol Karrier

[<< BACK ]  

MORSE Kontrol-Karrier - 800 lb. Capacity - Top Rim Clamp - Tilt Brake

MORSE Kontrol-Karrier - 800 lb. Capacity - Top Rim Clamp - Tilt Brake

Product Code: 185R-X01

Price: $1,320.00 Per Each

Qty  Each
Total actual cost of shipping this order to your location will be applied to your credit card

This is more than a drum dumper; it is also a drum lifter that allows for controlled pouring. This model includes a self-stopping hand crank with the tilt-brake installed. The drum handler picks up or places any top rimmed steel, plastic, or fiber drum up to 23 1/2 inch diameter with a minimum height of 34 inches. Kontrol Karrier has an 800 lb capacity or 500 lb half drum capacity. A half full drum will be unbalanced and bottom heavy so when you tilt it, the load shifts differently than if it were a full drum.

Lift your 55 gallon steel drum from a vertical or horizontal position. The top rim clamp and the bottom rim foot secure the steel drum. Just grip the top of drum with the top rim clamp, raise drum slightly and extend the bottom rim foot, positioning it under the drum, and place it upright or on its side.

Attach a cinch chain to lift or pour your plastic or fiber rimmed drum for added security. The chain has a 12 foot long pull chain, 6 feet of the chain wraps around the gear drive leaving a 6 foot drop of chain for pulling, rotating the drum to the desired angle for high level pouring.

Pick up, lift and control-pour drums stored on their side or on pallets

  • Handle any drum up to 23 1/2 inch diameter and at least 34 inch tall with any top rim
  • Provides controlled dumping and pouring
  • Loads and unloads up to 800 lb drums with ease
  • Self-stopping hand crank model
    212 lb

Options available include: Drum diameter adaptors for handling smaller drums, Bracket (Product code 4556-P) or Rim Clamp (Product code 4560-P) for handling plastic drums, and the Morstop tilt brake which automatically stops and holds the tilt angle of the drum.

A Spark Resistant Model is available through special order. Call our Customer Service Experts at 918-427-3600 for details.